This site uses cookies to improve your browsing experience. we’ll assume you’re OK to continue. If you want to read more about this, please clickPRIVACY ,thank you.
Medium Body Cartridges (50ml) - 6 PACK
Reprorubber® Orange Medium Body 50ml Cartridge
Clone Any Part Quickly With Reprorubber®
Reprorubber® is an exotic metrology-grade rubber that self-cures in minutes. It creates a virtually perfect replica casting of internal and external forms. Reprorubber® is excellent for checking parts with optical comparators, is non-toxic, easy to use, never requires a release agent and is 100 times faster than RTV silicons.
Easy-To-Use Prefilled, Quick Dispense Cartridges are now available in New Orange, Medium Body. Prefilled 50ml Dual barrel cartridges have a 1:1 ratio.
Model No. 16307, Reprorubber® Orange Medium Body 50ml Prefilled Cartridge, 6 Pack.
Facsimile® Liquid
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.).
Facsimile® will not affect the surface of ferrous or non-ferrous materials to which it is applied.
When casting in a "CONFINED" area, it is better to cast 1/2 of the internal shape.
Remember - when casting without releasing agent, an ACETONE soak removes Facsimile®.
Facsimile® Powder
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.).
Facsimile® will not affect the surface of ferrous or non-ferrous materials to which it is applied.
When casting in a "CONFINED" area, it is better to cast 1/2 of the internal shape.
Remember - when casting without releasing agent, an ACETONE soak removes Facsimile®.
Facsimile® Powder
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.).
Facsimile® will not affect the surface of ferrous or non-ferrous materials to which it is applied.
When casting in a "CONFINED" area, it is better to cast 1/2 of the internal shape.
Remember - when casting without releasing agent, an ACETONE soak removes Facsimile®.
Facsimile® Powder
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.).
Facsimile® will not affect the surface of ferrous or non-ferrous materials to which it is applied.
When casting in a "CONFINED" area, it is better to cast 1/2 of the internal shape.
Remember - when casting without releasing agent, an ACETONE soak removes Facsimile®.
Facsimile® Release Agent
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.).
Facsimile® will not affect the surface of ferrous or non-ferrous materials to which it is applied.
When casting in a "CONFINED" area, it is better to cast 1/2 of the internal shape.
Remember - when casting without releasing agent, an ACETONE soak removes Facsimile®.
Facsimile® Release Agent
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.).
Facsimile® will not affect the surface of ferrous or non-ferrous materials to which it is applied.
When casting in a "CONFINED" area, it is better to cast 1/2 of the internal shape.
Remember - when casting without releasing agent, an ACETONE soak removes Facsimile
Facsimile® Liquid
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
Closer inspection can be performed by allowing the casting to cure in a pressure vessel (15 p.s.i.).
Facsimile® will not affect the surface of ferrous or non-ferrous materials to which it is applied.
When casting in a "CONFINED" area, it is better to cast 1/2 of the internal shape.
Remember - when casting without releasing agent, an ACETONE soak removes Facsimile®.
Facsimile® Liquid
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
Facsimile® Liquid
Clone Any Part Quickly With Facsimile® Quick-Setting Compound
Makes Accurate Reproductions In 6 To 8 Minutes
Facsimile® is a special plastic compound kit which is used for duplicating surface flats, roughness and for dimensional transfer of inaccessible locations. Many other applications are listed below and many more in our free 16 page applications booklet.
Make duplicates for measuring, such as gages, etc.
Test surface geometry, flatness, microfinish, etc.
Make permanent records of surface geometry, etc.
Make custom holding and nesting fixtures.
Make quick jigs.
Make excellent stylus patterns.
Make instant molds and patterns.
Cast small run parts and prototypes.
Mask, fill in and seal.
Fretting depth of blade dovetails in jet engines.
Make potting, bonding and repairing easy.
16307
16205
16202
16203
16204
16200
16201
16206
16207
16208
